Payment & Shipping Terms:
|Max. Power::||280W||Solar Cell:||Mono Crystalline Solar Cell|
|Warranty:||10 Years||Cell Number:||60 Pcs(6*10, 156*156)|
|Name:||280 Watt Mono Solar Panel||Module Name:||280 Watt Monocrystalline PV Module|
|Application:||Solar System For Home Or Industrial Use/outdoor Power Gengeration||Installation Site::||Flat Roof, Or Flat Ground,power Staion|
|Working Life:||25 -30 Years|
1) High reliability with guaranteed +/-3% output power tolerance
2)The modules can withstand high wind-pressure, snow loads and extreme temperatures
3) Bypass diodes to minimize power loss with shading
4) High and stable conversion efficiency to ensure the highest quality.
A Grade Polycrystalline Silicon Solar Cell
Format: 156±0.5mm, diagonal 219.2±1.0mm; Average thickness: 200μm ±20μm
Front(-): 1.5mm bus bars(silver) ; Blue anti-refelecting coating(silicon nitride)
Backe(+): 2.5mm wide soldering pads(silver) ; Back surface field(aluminiem)
Best quality best price 280w monocrystalline PV solar panel
Quality and warranty
For a period of twenty‐five (25)years commencing on the Warranty Start Date, loss of power output
of the nominal power output measured at Standard Test Conditions (STC) for the Product(s) shall not exceed:
For Monocrystalline A grade solar cell, 2% in the first year, thereafter 0.66% per year, ending with 82%
in the 25 th year after the Warranty Start Date;
The Warranty Start Date shall be defined as the date of the Bill of Lading date:
10Years Manufacturing Warranty
15Years Warranty 90% Power Output
25Years Warranty 85% Power Output
280w mono solar panel specification for reference
|Maximum Power at ST(Pmax)W||270Wp||280Wp|
|Maximum Power Voltage(Vmp)V||31.4V||31.8V|
|Maximum Power Current(Imp)A||8.60A||8.81A|
|Open Circuit Voltage(Voc)V||38.3V||38.8V|
|Short Circuit Current(Isc)A||9.31A||9.53A|
|Size of Module (mm)||1640*992*40|
|Number of Cell (PCS)||6*10|
|Components & Mechanical Data|
|Front Glass Thickness (mm)||High Transparency Tempered Glass 3.2mm|
|Junction Box Type||Pass the TUV Certificate PPO(Black/IP65)|
|Frame (Material Corners, etc.)||Aluminum-alloy|
|Encapsulation Material||EVA(0.50±0.03 mm thickness)|
|Back Foil||White TPT(0.50±0.03 mm thickness)|
|Fixing Adhesive||Silicone Sealant ( White)|
|Temperature Range (°C)||-40°C to +90°C|
|Max Load Capacity(Kpa)||2.4wind load/5.4 snow load|
|Temperature Coefficient of Pm||-0.45±0.05 %/°C|
|Temperature Coefficient of Isc||0.05±0.01 %/°C|
|Temperature Coefficient of Voc||-0.35±0.02%/°C|
|Pieces per pallet||26PCS||26PCS|
|Pieces per container||340PCS||812PCS|
|Values at Standard Test Conditions|
All technical data at standard test condition: AM=1.5, E=1000W/m2℃
Produced in correspondence with international safety standards.
CAN SHOCK,BURN OR CAUSE DEATH. Do not touch terminals
Its main role is to protect the power generation ( solar cells ) , there is a selection of light transmittance requirements : 1 ) must be high transmittance (typically 91% or more ) ; 2 ) super white steel processing.
For bonding glass and power generation fixed body ( such as cells ) , transparent EVA material directly affect the life of components exposed to the air EVA prone aging yellow , thus affecting the transmittance components , thus affecting in addition to generating the quality of the components itself, the quality EVA lamination process on the component manufacturers is also very large, such as EVA plastic viscosity of non-compliance , EVA and glass, back bonding strength is not enough, can cause premature aging EVA, the affected component life.
3. Solar cells
The main role is to generate electricity , the electricity is the main market mainstream film crystalline silicon solar cells , thin-film solar cells , both have their advantages and disadvantages . Crystalline silicon solar cells , the equipment costs are relatively low , but the high cost of consumption and cells , photoelectric conversion efficiency is high, the next generation in outdoor sunlight is more appropriate ; higher thin-film solar cells , the relative cost of equipment , but the cost of consumption and battery low, relatively low photoelectric conversion efficiency of crystalline silicon solar cells , but the effect is very good low-light , in the ordinary light can also generate electricity , such as solar calculator .
Sealing, insulation , water ( usually with TPT, TPE , etc. ) the material must be resistant to aging , component manufacturers generally have warranty for 25 years , tempered glass, aluminum is generally no problem , the key lies in whether the backplane and can meet the requirements of silica gel.
Solar panels solar power system is the core part of the solar system, the highest part of the value . Its role is to convert solar energy into electrical energy stored in batteries or sent to , or promote the work load .
When the p -type semiconductor and n -type semiconductor when combined together into a tight , at the interface between the p-n junction is formed . When the cell is irradiated with sun light in the p-n junction is formed on both sides of the positive and negative charge accumulation , the photovoltaic generation of the formation of the internal electric field , which is " photovoltaic effect ." Theoretically, this time, if the electric field on both sides of the built-in and lead-out electrodes connected to an appropriate load , the current will be formed , will be obtained on the load power . The solar cell module is the use of electronics to achieve characteristics of the semiconductor material of solid P-V conversion means . Which is the photovoltaic solar battery works .