Payment & Shipping Terms:
|Max. Power::||220W||Solar Cell:||Mono Crystalline Solar Cell|
|Warranty:||10 Years||Cell Number:||72 Pcs(6*10, 125*125)|
|Name:||220 Watt Mono Solar Panel||Module Name:||220 Watt Monocrystalline PV Module|
|Application:||Solar System For Home Or Industrial Use/outdoor Power Gengeration||Installation Site::||Flat Roof, Or Flat Ground,power Staion|
|Working Life:||25 -30 Years|
Polycrystalline or Monocrystalline silicon is a material consisting of thin wafers that are cut from a silicon
crystal which has grown in several directions. This advanced texturing process provides polycrystalline
or moncrystalline solar panels with a higher power output than amorphous panels of the same dimensions,
and makes them more cost and space-effective. These individual wafers are assembled into panels that
are covered by durable, weatherproof tempered glass. Thanks to their efficiency and durability, these
solar panels require virtually no maintenance once installed.
Solar panel helps us to take full advantage of solar energy which is clean, inexhautible and pollution-free,
and it converts sunlight into electric. In this way, we can help people in remote areas without mains supply
and lack of electricity, and light up nights and bring people hope there.
|Solar Cell||60(6x10) solar cells 156x156mm||Maximum System Voltage||DC1000V (IEC)|
|Dimensions||1580×808×40 mm||Maximum Series Fuse||15 A|
|Back Cover||TPT (Tedlar-PET-Tedlar)||Operating Temperature||-40℃~+85℃|
|Encapsulant||EVA (ethylene vinyl acetate)||Storage Temperature||-40℃~+85℃|
|Frame||Double-layer anodized aluminium alloy||Max. Wind Load / Max. Snow Load||2400Pa / 5400Pa|
|Junction Box||IP65 rated||Application Class||Class A|
|Cables/Connectors||4.0mm2 900mm/MC4 or compatible connectors||Module Area (m2)||1.63m2|
|Front Cover||3.2mm thick, tempered glass||Packing configuration||300Pcs./20ft,container|
|Rated Maximum Power at STC||190W||195W||200W||205W||210W|
|Open Circuit Voltage(Voc/V)||45.0||45.1||45.3||45.5||45.8|
|Maximum Power Voltage(Vmp/V)||36.5||37.0||37.6||37.9||38.0|
|Short Circuit Current(Isc/A)||5.56||5.63||5.72||5.79||5.83|
|Maximum Power Current(Imp/A)||5.21||5.28||5.32||5.41||5.53|
|Standard Test Condition(STC)||Irradiance 1000w/m2, Cell Temperature 25 Centigrade, Air Mass 1.5|
Frame:Anodized aluminum alloy
Glass:Low-iron tempered glass, 3.2mm
Cell package:Ethylene vinyl acetate (EVA)
Solar cell:Monocrystalline silicon solar cell 6*12 (125 mm*125 mm)
Junction box:Rated current>12A, IP>65, TUV&UL
Cable:Length 900m, 1*4mm2
Hail coefficient of resistance
Max. diameter 25mm, speed 23m/s
Maximum static load, Front(e.g., snow and wind)
Maximum static load, Back(e.g., wind)
All technical data at standard test condition: AM=1.5, E=1000W/m2℃
Produced in correspondence with international safety standards.
CAN SHOCK,BURN OR CAUSE DEATH. Do not touch terminals
Its main role is to protect the power generation ( solar cells ) , there is a selection of light transmittance requirements : 1 ) must be high transmittance (typically 91% or more ) ; 2 ) super white steel processing.
For bonding glass and power generation fixed body ( such as cells ) , transparent EVA material directly affect the life of components exposed to the air EVA prone aging yellow , thus affecting the transmittance components , thus affecting in addition to generating the quality of the components itself, the quality EVA lamination process on the component manufacturers is also very large, such as EVA plastic viscosity of non-compliance , EVA and glass, back bonding strength is not enough, can cause premature aging EVA, the affected component life.
3. Solar cells
The main role is to generate electricity , the electricity is the main market mainstream film crystalline silicon solar cells , thin-film solar cells , both have their advantages and disadvantages . Crystalline silicon solar cells , the equipment costs are relatively low , but the high cost of consumption and cells , photoelectric conversion efficiency is high, the next generation in outdoor sunlight is more appropriate ; higher thin-film solar cells , the relative cost of equipment , but the cost of consumption and battery low, relatively low photoelectric conversion efficiency of crystalline silicon solar cells , but the effect is very good low-light , in the ordinary light can also generate electricity , such as solar calculator .
Sealing, insulation , water ( usually with TPT, TPE , etc. ) the material must be resistant to aging , component manufacturers generally have warranty for 25 years , tempered glass, aluminum is generally no problem , the key lies in whether the backplane and can meet the requirements of silica gel.
Solar panels solar power system is the core part of the solar system, the highest part of the value . Its role is to convert solar energy into electrical energy stored in batteries or sent to , or promote the work load .
When the p -type semiconductor and n -type semiconductor when combined together into a tight , at the interface between the p-n junction is formed . When the cell is irradiated with sun light in the p-n junction is formed on both sides of the positive and negative charge accumulation , the photovoltaic generation of the formation of the internal electric field , which is " photovoltaic effect ." Theoretically, this time, if the electric field on both sides of the built-in and lead-out electrodes connected to an appropriate load , the current will be formed , will be obtained on the load power . The solar cell module is the use of electronics to achieve characteristics of the semiconductor material of solid P-V conversion means . Which is the photovoltaic solar battery works .
PV Module producer, global green energy and power station supplier!!!
1. High-transmittance low-iron tempered glass, anti-aging EVA, excellent weathering resistance TPT
2. Anodized quality aluminum frame, beautiful appearance
3. Wind resistance, pressure resistance, high conversion efficiency
1. Gird-connected power generation system
2. Off-grid power generation system
3. Building-integrated power generation facilities
|L/C||L/C amount above 50,000 usd, we can accept L/C at sight|
|Delivery Time||7~10days after receiving payment for one container|